|
|
|
Usuarios conectados
Actualmente hay 6021 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
AVR340
harman/kardon
<8>VIDEO PCB(40-1) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Disconnect the lead wire(BN41-6P) on the Tone PCB(37-3) from connector(CN41) on the Video PCB(40-1 3.Disconnect the connector (CN15-Card cable) on the Input PCB(39-1) from connector(CN43) on the Video PCB(40-1). 4. Remove 6 screws(S8) and then remove the Video PCB(40-1). <9>I-POD PCB(41) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Disconnect the lead wire(BN42-5P) on the INPUT PCB(39-1) from connector(CN42) on the I-POD PCB(41). 3. Disconnect the lead wire(BN45-4P) on the INPUT PCB(39-1) from connector(CN45) on the I-POD PCB(41). 4. Disconnect the lead wire(BN44-4P) on the Download PCB(37-9) from connector(CN42) on the I-POD PCB(41). 5. Remove 2 screws(S13) and then remove the I-POD PCB(41). <10>INPUT PCB(39-1) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Remove the Connect PCB(37-7). 3. Disconnect the lead wire(BN18-5P) on the Digital input PCB(37-8) from connector(CN18) on the Input PCB(39-1). 4. Disconnect the connect (BN72-Card canle)) on the Fip PCB(37-1) from connector(CN72) on the Input PCB(39-1) 5. Remove 11 screws(S8,S11) and then remove the Input PCB(39-1). <11>Download PCB(37-9) REMOVAL 1.Remove the Top-cabinet, referring to the previous step<1>. 2.Disconnect the connector(CN15) from lead wire(BN15-8P) on the Fip PCB(37-2) 3.Remove 2 screws(S4) and then remove the Download PCB(37-9). <12>POWER TRANS(36) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Disconnect the connector (BN20,BN96) on the Trans PCB(40-4) from lead wire(CN20-3P,CN96-6P) on the Main PCB(38-1). 3. Remove 4 Trans screws(S9) and then remove the Power Trans(36). <13>MAIN PCB ASS�Y(38-1) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Remove the Tuner module, referring to the previous step<7>. 3. Remove the Video PCB, referring to the previous step<8>. 4. Remove the Input PCB, referring to the previous step<9>. 5. Disconnect the connector(CN80) from lead wire(BN80-11P) on the Fip PCB(37-1). 6. Disconnect the connector(CN91) from lead wire(BN91-3P) on the Moms PCB(37-5). 7. Disconnect the connector (CN20,BN96) from lead wire(CN20-3P,BN96-8P) on the Trans PCB(40-4,40-5) 8. Remove 11screws(S1-1EA, S4-2EA, S6-2EA, S8-6EA) and then remove the Main PCB ASS�Y(38-1).
31
|
|
|
> |
|
